Proceq DY-225

It is suited for very high strength applications such as testing of fibre reinforced polymers (FRP) bonded to concrete structures.

Proceq DY-225 is an automated pull-off tester with a maximum pulling force of 25 kN (5620 lbf). It is suited for very high strength applications such as testing of fibre reinforced polymers (FRP) bonded to concrete structures.

Instrument Firmware:
Maximum load
Actual load rate
Test duration
Complete report of the test
Failure mode reporting
Full data review on instrument

PC Software:
DY-2 Link with live view of actual load rate graph

Memory:
100 measurements

Connections:
USB to PC and for charging

Calibration Accuracy:
EN ISO 7500-1 Class 1 (±1 % from 20 % of maximum force)

Battery Capacity:
1500 mAh, 3.7V (min. 80 measurements)

Weight:
4.5 kg

Bond strength of coatings and overlays
Bond strength of repair materials such as FRP
Tensile strength in concrete renovation
Additional Applications
Combining pull-off method
Applied coatings on composite materials

Working Range:
1.3 to 12.7 MPa (185 to 1847 psi)

Tensile force (50 mm test disc):
2.5 to 25 kN (562 to 5620 Ibf)

Maximum Stroke:
5 mm

Maximum Pulling Speed:
2.2 mm/min (0.086 inch/min)