Demagnetization Units

Remove residual magnetism after magnetic particle inspection

Magnaflux demagnetisation units remove any residual magnetism remaining after conducting Magnetic Particle Inspection. Demagnetisation of ferromagnetic parts and materials often requires a requisite to final finishing or to ready an item for its ultimate use. Industrial demagnetising is not an easy task, unless an effective demagnetising system is used. It is especially difficult when the magnetic field must be reduced to a very low level. Compact in size and ruggedly built, Magnaflux demagnetising equipment offers.

Features

ETT Series

The demagnetisation tunnels of the ETT series are designed for tabletop use. The spool current is activated by an ON/OFF switch. The ETT series conforms to IEC Protection Class II (double insulated).
EET Brochure

ETW Series

For the demagnetisation of larger and heavier workpieces, we recommend the use of an ETW demagnetisation unit with trolley. The workpieces for demagnetisation are placed onto the trolley on the shorter outrigger side, and manually pushed through the tunnel towards the longer side. a fast and efficient method for demagnetising a broad variety of part types and sizes.
ETW Brochure

Applications

Ideal for:

Aviation
Power Gen
Manufacturing
Petrochemical
Research

Technical Data

		ETT 150	ETT 350	ETT 550
Part Numbers		101155	101355	101555
Field Strength	kA/m	13.5 kA/m	10 kA/m	6.2 kA/m
Mains connection	V	400	400	400
Current Consumption	I (A)	1.6	8.5	12
Power Consumption	kVA	0.7	3.4	4.8
Frequency	Hz	50	50	50
Measurement A	mm	260	480	680
Measurement B	mm	150	350	550
Measurement C	mm	260	475	695
Measurement D	mm	166	325	325

		ETW 350	ETW 550
Part Number		102355	102555
Field Strength	kA/m	10	6.2
Mains connection	V	400	400
Current Consumption	I (A)	8.5	12
Power Consumption	kVA	3.4	4.8
Frequency	Hz	50	50
Measurement A	mm	480	680
Measurement B	mm	350	550
Measurement C	mm	260	460
Measurement D	mm	475	695
Measurement E	mm	1190	1410
Measurement F	mm	325	325